How to judge the quality of color coated rolls

Release time:

Oct 19,2022

　　For the current construction market, there are many new types of building materials, but the diversity of color-coated rolls makes it gradually become a popular choice. The important thing is that it can meet people's needs in all aspects. As people's requirements for building materials are getting higher and higher, people should pay attention to quality issues when purchasing building materials, so how to judge the quality of building materials is very important.

　　Color Coated Roll Observe the thickness of the substrate and coating: The swatch consists of the substrate and the colored peritoneum or coating. We need to consider the thickness of the substrate and peritoneal coating. Better steel substrates range from 0.02 mm to 0.05 mm, and the coating or coating thickness is usually less than 0.15 mm. The thickness of the substrate has a very important influence on the service time of the swatch. Color steel plates on some substrates are usually compounded or laminated with color steel plates to reduce the thickness of the substrate, but the thickness of the peritoneum is increased to reduce the production cost of color steel plates and greatly reduce the service life of color steel plates. plate.

　　Observe the drain edge of the color steel plate: When taking the color steel plate, observe whether the exposed steel plate, such as the section, has fine, gray, black, and impurity crystals. If the cutting surface is crystal clear, the quality will be better.

　　Listen: Hit the color steel plate with your fingers or something good. The color steel plate is of poor material, the sound is dull, the metal sound is not obvious, and the color steel plate metal sound is loud and clear.

　　To sum up, color-coated roll is a new type of building material with good environmental protection functions and is widely used in roofs, walls, temporary houses, etc.

On 25 November 2022 , 50 tons of Galvalume steel coil were delivered from Lianfeng Steel to Jakarta Port, Indonesia. The following is the whole process of order production and shipment.

The main purpose of color-coated board

Coated steel plate is also known as color-coated steel plate and color-coated steel plate. Color-coated steel plate is a kind of color-coated steel plate. Products made by rolling coating paint and baking and cooling after conversion treatment. The substrates of color-coated plates include cold-rolled substrates, hot-dip galvanized substrates, electro-galvanized substrates, and aluminum-zinc-plated substrates. The types of paint coating on color-coated plates can be divided into polyester, silicon-modified polyester, vinylidene fluoride, high weather-resistant polyester, etc. The production process has developed from one coating and one baking to two coating and two baking. Three coating and three baking processes have also appeared. There are many colors of color-coated panels, such as white gray, sea blue, orange, sky blue, crimson, brick red, ivory white, porcelain blue, etc. The surface state of color-coated panels can be divided into ordinary coated panels, embossed panels and printed panels. The market uses of color-coated panels are mainly divided into construction, home appliances and transportation.

We are located in China's industrial province - Shandong Province, on the verge of the Bohai Sea and the Yellow Sea, with convenient export and transportation conditions. Shandong Banghong New Material Co., Ltd. has diversified products.

+8618054335557

18054335557@163.com

Xingfu Town Industrial Park, Boxing County, Binzhou City, Shandong Province, China

京ICP备10002622号-38

国际站建设：中企动力淄博外贸Google推广